Multi HSRP Interface Tracking
Active Router가 Down되거나 회선에 문제가 생겨 통신이 불가능해진 경우 Active Router를 전환하기 위해 사용.
셋팅
HQ_SE_1F_SW1(config-if)#standby 10 track FastEthernet0/6
HQ_SE_1F_SW1(config-if)#standby 10 preempt
결과
HQ_SE_2F_L3_1#show standby brief
P indicates configured to preempt.
|
Interface Grp Pri P State Active Standby Virtual IP
Vl10 10 150 P Active local 192.168.2.29 192.168.2.30
HQ_SE_2F_L3_2#show standby brief
P indicates configured to preempt.
|
Interface Grp Pri P State Active Standby Virtual IP
Vl10 10 145 P Standby 192.168.2.28 local 192.168.2.30
HQ_SE_2F_L3_1#show standby brief
P indicates configured to preempt.
|
Interface Grp Pri P State Active Standby Virtual IP
Vl10 10 140 P Standby 192.168.2.29 local 192.168.2.30
HQ_SE_2F_L3_2#show standby brief
P indicates configured to preempt.
|
Interface Grp Pri P State Active Standby Virtual IP
Vl10 10 145 P Active local 192.168.2.28 192.168.2.30
'네트워크-Router, Switch, Security > 라우터-Router' 카테고리의 다른 글
MLS QOS Classification(분류) (0) | 2017.12.17 |
---|---|
DM VPN (0) | 2017.12.15 |
Hot Standby Routing Protocol (0) | 2017.12.13 |
NAT Static (0) | 2017.12.08 |
Multi Cast. dense-mode (0) | 2017.12.06 |